Bluelab® Guardian Monitor Connect

Bluelab® Guardian Monitor Connect

The Bluelab® Guardian Monitor Connect is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark for crop success. Just one Bluelab® Connect Stick is required to receive wireless data from one or more Guardian® Monitor connects.

  • Data logging capability (ONE Bluelab Connect Stick is required, sold separately)
  • View data and current status remotely via Google Docs (A computer with permanent internet access is required)
  • ‘Plant safe’ green LEDs
  • Large easy to read display
  • No calibration required for conductivity and temperature
  • Simple push button pH calibration
  • Selectable values for conductivity and temperature
  • Flashing high and low alarms
  • Greater tolerance to RF /electronic interference provided
  • Water resistant design
  • International power supply included
  • Replaceable double junction pH probe included
  • Adjustable display brightness
  • Non-volatile memory
  • Compatible with Bluelab Connect Stick and Bluelab Connect Range Extender

    Probe Tips:

    • All probes are interchangeable between all Bluelab products
    • All probes carry a 6 month warranty
    • Proper hydration of pH probes is vital to maintain wick
    • All pH probes eventually need to be replaced—they can only house so much reference solution
    • KCl storage solution is required for optimum probe maintenance
    • RO water will reduce probe life

      Note: Clean & calibrate meters every 30 uses or 30 days for best results. A 7 & 4 will appear on the screen of the combo meters to indicate it is properly calibrated–when it goes away, it is time to calibrate. A check mark will appear on the screen of all other meters to indicate it is properly calibrated–when it goes away, it is time to calibrate. Calibration process has been made uniform across entire product line. Calibration instructions are printed on the back of each meter.  Always calibrate at 7.0 first, then 4.

        Bluelab - Positioning Connect Devices

        Bluelab Guardian Monitor Connect - Technical Specifications

        Warranty:  2 Year

        Weight (lb.): 1.83

        Length (in.): 8.58

        Width (in.): 5.17

        Height (in.):  3.62

        Select Variant