HydroCheck Tray & Reservoir Overflow Sensor w/ Water Pump Cutoff Control

HydroCheck Tray & Reservoir Water Pump Controller with Overflow Sensor

The HydroCheck pump controller is designed to prevent water damage from ever happening by shutting off the power to your water pump when the water level in the reservoir or tray gets too high. After you correct the problem and reset the switch, the controller starts the water pump back up again so it can resume operation. It’s that simple. No mess. No floods. No maintenance.

Water happens if your main drain line clogs up with Plant Roots?

The HydroCheck Pump Controller works with all hydroponics reservoir & trays, and is easy to hookup. Simply plug the control module into the grounded 115 VAC utility outlet, secure the sensor to the desired water level with a tie wrap, and plug your water pumps power cord into the control module. The HydroCheck LED light will turn red and an alarm will sound when a potential flooding condition exists.

Key Product Features:

  • Prevents water damage caused by overflowing
  • Can be used with all hydroponic reservoirs, trays, or tanks
  • Eliminates flooding by shutting off water pump when sensor detects water level is too high
  • Keeps the washer off until the problem is corrected and the switch is reset
  • Works with all hydroponic applications
  • Plugs into a grounded 115 VAC utility outlet
  • Fully automatic—failsafe operation- no maintenance
  • Alarm sounds until water starts to drop
  • Simple hookup—plug in control module, attach sensor at desired water level height, and plug water pump into control module
  • Comes with 6' sensor cable
  • CUL Listed


Select Variant