Titan Controls® Atlas® 1, Remote Sensor Replacement

Titan Controls® Atlas® 1, Remote Sensor Replacement

Ask a Question
List Price: $38495
Now: $30798

Ships within 24 hours | In Stock

Titan Controls® Atlas® 1 - Remote Sensor Replacement

The sensor comes factory calibrated for precise CO2 readings and utilizes low voltage technology to avoid Radio Frequency Interference (RFI) from electronic ballasts.

Instructions for use:

  • 1. Attach ½ moon plate to the back of the remote sensor using the small screws included.
  • 2. Turn off power to Atlas® 1 before connecting remote sensor.
  • 3. Carefully attach the CAT 45 cable to the remote sensor.
  • 4. Be careful not to bend the ‘Sensor Input’ pins when inserting the CAT 45 cable. It could cause the sensor to function improperly.
  • 5. Turn on power to Atlas® 1 and verify that remote sensor is operating properly.
  • 6. The remote sensor is FACTORY CALIBRATED. It is not necessary to calibrate the unit after installation.

    Features:

    • Comes with a 25 foot Remote sensor
    • Features adjustable set Point and elevation levels, a built in 'self calibration' function and an integrated photocell that enables operation in daytime hours Only, when the plants need Co2
    • Simple to use and easy to operate. 15 amps/120 volt/60 Hz. Replacement sensor can be purchased Separately
    • The sensor comes factory calibrated for precise Co2 readings and Utilizes low voltage technology to avoid Radio frequency interference (RFI) from electronic ballasts

       

      Titan Controls® Atlas® 1 Product Instructions

      Weight (lb.):  0.5

      Length (in.):  4.75

      Width (in.):  3.0

      Height (in.):  1.0

      Controller Features:  No

      Voltage:  120V

      Power Cord Length:  25'

      Questions & Answers

      Have a Question?

      Be the first to ask a question about this.