Water Quality TDS Detection Pen

Water Quality TDS Detection Pen

Main features:

• Multifunctional TDS tester: Test the purity of drinking water to ensure its health
• High precision to ensure that the reading is always accurate at various temperatures
• Easier to read and use
• Hold function: save the measurement for easy reading and recording.
• Automatic shutdown function: After the meter is idle for 10 minutes, the meter will automatically turn off to save battery.
• Measuring range: 0-9990 ppm. From 0-999 ppm, the resolution is in 1 ppm increments. From 1000 to 9990 ppm, the resolution is in 10 ppm increments, represented by a flashing "x10" image.
• Factory calibration: Our meter has been calibrated with 342 ppm NaCl solution. There is a TDS chart label on the back of the meter to illustrate the TDS value.
• The user will read the TDS water value on the LCD display above the center of the pen.
• It has a detection sensor, which basically functions when the metal is in contact with the measured water.
• After testing the water with this small tool, the reading will stabilize for about three seconds. It measures water quality at the ratio of one part per million.
• TDS means total dissolved solids, the content of minerals and water salts in the water.
• The water quality detection pen is used to detect poor water quality and water quality.

Parameter:

• Battery: 2 x AG13 batteries (included)
• Waterproof grade IPX6

Notes:

• Avoid immersing the TDS pen directly in water.
• Avoid direct sunlight and high temperature.
• Avoid heavy pressure and drop during installation.

Application:

• Hydroponics
• Aquaculture
• Aquarium
• Drinking Water
• Food & Beverage